Tech Specs

Get to know the Mikme Microphone's technical specifications. 

Standalone 

Audio

1 x Capsule – 1 inch, gold plated, true condenser
Polar pattern – Cardioid
Audio frequency bandwidth – 18 to 22.000 Hz
Sensitivity – 18 mV/Pa
Signal to noise – 78 dB-A
Maximum Sound Pressure Level – 125 dB
Adjustable gain – 0 to 30 dB

AUDIO RECORDER 

Internal memory – 16 GB 
Recording capacity – mp4 only, 370 hours
Recording capacity – wav only, 34 hours 
Bit depth – 24 Sampling frequencies – 44.1 kHz, 48 kHz, 96 kHz 
Processor – 2x 168 MHz Cortex M4 
Rechargeable Li-Po battery – 920 mAh 
Battery powered operation time while standalone recording – 3.5 hours

Wireless

BLUETOOTH 2.1 

Battery powered operation time while recording with Bluetooth – up to 3.5 hours

MIKME LOST & FOUND PROTOCOL

Immediate Secure Audio Transmission with patented Packet Loss and Sync Detection = Quality of Service Audio Streaming with Mikme App

Works with 64 Bit Devices with iOS 9 and newer (with installed Mikme App). To see if your device is compatible, click here

Wired

MICRO USB CONNECTOR

Bit depth – 24
Sampling frequencies – 44.1 kHz, 48 kHz, 96 kHz 
Charging battery via USB connector

Works with:

  • Mac OS 10.8 and higher with USB 2.0
  • iOS 9 and newer
  • Windows XP and higher with USB 2.0
AUDIO OUT

3.5mm Mini Jack
No latency monitoring of:

  • Microphone capsule audio signal
  • Playback audio signal from Mikme App
  • Mix balance adjustable via Mikme App

Used for headphones monitoring and stereo audio out to DSLR or mixer

Mounting

3/8 in thread for microphone stands
1/4 in thread for DSLR tripods and mic stands

Product Weight & Dimensions

WEIGHT  

162 g (0.35 lbs) Weight (net, product only)

DIMENSIONS 

70 mm x 73 mm x 35 mm
2.75 in x 2.87 in x 1.4 in

All specifications subject to change without notice.

Apple MFi Certified